Power
Controller Firmware Revision History
***Current
Release***
1.4.3
(BIOS: 8AA39795) (Firmware: B6EF1CE7 )
Improved
boot loader.
Improved
help files.
Update now.
1.4.2
Removed
subnet restriction when running scripts.
Improved bootloader and firmware updating.
1.3.9
(BIOS: 1555A5A1) (Firmware: 4FD9DCD3)
Voltage/current metering calibration
improvements.
Fixed
AutoPing setup
error with Internet Explorer.
1.3.7
Improved
network setup section. Improved help.
Released scripting with
serial port & LCD drivers.
Added multi-user support and outlet mapping.
Improved AutoPing adding
multi-target mode.
1.2.C (BIOS: 1851CB73
) (Firmware: 7E60D1A3)
Disabled listening on TCP Port 0.
Improved
TCP LAST-ACK retransmit for Smoother UI.
1.2.B (BIOS: 1851CB73 ) (Firmware: ABF31820)
Minor improvements.
1.2.A (BIOS: 1851CB73) (Firmware: ABF31820)
Improvements to help links for all product variants.
1.2.9 (BIOS: 7964D312) (Firmware: 1283C3A0)
Critical option can be set requiring confirmation to power cycle or switch off a switch. Minor
improvements.
Units
shipping with this BIOS version and newer will not power cycle
the
outlets when updating firmware.
1.2.7 (BIOS: 16E37BE0) (Firmware: 06FA1007)
Inserted a space before the controller name in the set up page and the controller name to show on the login page title.
Improved sequence delay accuracy. Blue LEDs are lit during firmware update (on EPCR2/2L). Improved system clock accuracy. HTTP redirect logic changed slightly.
1.2.4
Improved stability and
Syslog. Added on-board system log and additional auto-ping options.
1.2.1
Added internal memory test
and bypass. Improved
Syslog logging.
1.1.B-1.1.5
Additional
Autoping improvements.
Fixed web interface
response.
Added a warning about using the default password.
Minor improvements in
Autoping compatibility and performance.
1.1.3
Minor improvements in
Autoping compatibility.
1.0.4
Improved web server
robustness. Added the ability to change the login name.
1.0.2
Solved possible MAC addressing
issue affecting users with multiple web switches.
Note: The unit will restart after the update and all connected
devices will be reset unless the BIOS version is 1.2.9 or newer. BIOS
and Firmware signatures are
identified on the control web page in the lower left corner.
